High qualty Microsoft MCSM 070-410 dumps pdf training resources and study guides download free try from lead4pass. New Microsoft MCSM 070-410 dumps vce youtube demo shared free update. “Installing and Configuring Windows Server 2012” is the name of Microsoft MCSM https://www.geekcert.com/70-410.html exam dumps which covers all the knowledge points of the real Microsoft exam. It is the best choice for you to pass Microsoft 070-410 exam easily in the first attempt.
[Best Microsoft 070-410 dumps pdf free download]: https://drive.google.com/open?id=0B_7qiYkH83VRUW1XOTI1aFZ2c2s
[Best Microsoft 070-413 dumps pdf free download]: https://drive.google.com/open?id=0B_7qiYkH83VRY1RKYlNPVUtxMWc
Useful Microsoft MCSM 070-410 Dumps Exam Questions And Answers (Q1-Q20)
QUESTION 1
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1.
You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.
What should you configure?
A. The Security settings of GP1
B. The Block Inheritance option for AllComputers
C. The Security settings of AllComputers
D. The WMI filter for GP1
Correct Answer: D
Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied).If the WMI filter evaluates to true, the GPO is applied.
QUESTION 2
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2. You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses.
What should you do first?
A. Create a reverse lookup zone.
B. Convert the contoso.com zone to an Active Directory-integrated zone.
C. Create a GlobalNames zone.
D. Configure dynamic updates for contoso.com.
Correct Answer: C
Explanation:
You should use GlobalNames zone to take advantage of single-label names. This will also ensure that the zone remains valid.
QUESTION 3
Your network contains an Active Directory domain named contoso.com. The DNS zone for contoso.com is Active-Directory integrated.
The domain contains 500 client computers. There are an additional 20 computers in a workgroup.
You discover that every client computer on the network can add its record to the contoso.com zone.
You need to ensure that only the client computers in the Active Directory domain can register records in the contoso.com zone.
What should you do?
A. Sign the contoso.com zone by using DNSSEC.
B. Configure the Dynamic updates settings of the contoso.com zone.
C. Configure the Security settings of the contoso.com zone.
D. Move the contoso.com zone to a domain controller that is configured as a DNS server.
Correct Answer: B
QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com.
The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server.
From Server2, you run nslookup.exe as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that when you run Nslookup, the correct name of the default server is displayed.
What should you do?
A. On Server1, create a reverse lookup zone.
B. On Server1, modify the Security settings of the contoso.com zone.
C. From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list.
D. From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list.
Correct Answer: A
Explanation:
Make sure that a reverse lookup zone that is authoritative for the PTR resource record exists. PTR records contain the information that is required for the server to perform reverse name lookups.
QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2. 070-410 dumps
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
What should you do first?
A. From the DHCP console, reconcile Scope1.
B. From the DHCP console, delete Scope1.
C. From the DHCP console, modify the Scope Options of Scope1.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
Correct Answer: B
Explanation:
The only way to change the subnet mask of a scope is to delete and recreate the scope. Set-DhcpServerv4Scope does not include a parameter for the subnet mask.
QUESTION 6
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A. 2001:ab32:145c::32cc:401b
B. ff00:3rff:65df:145c:dca8::82a4
C. fd00:ab32:14:ad88:ac:58:abc2:4
D. fe80:ab32:145c::32cc:401b
Correct Answer: C
Explanation:
Unique local addresses
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 – 172.31.255.255–can be used on an IPv4 network.
Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet.
A unique local address is always structured as follows:
The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.
QUESTION 7
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2.All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts.
Servers are restarted only occasionally.
You need to identify which servers were restarted during the last two days.
What should you do?
A. Run Get-ADComputer and specify the SearchScope parameter.
B. Run dsquery computer and specify the -stalepwd parameter.
C. Run dsquery server and specify the -o parameter.
D. Run Get-ADComputer and specify the lastLogon property.
Correct Answer: D
QUESTION 8
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in following table.
When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
A. The placement of the global catalog server
B. The placement of the infrastructure master
C. The placement of the domain naming master
D. The placement of the PDC emulator
Correct Answer: D
Explanation:
The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction between the RID operations master role and the PDC emulator role
The PDC emulator processes password changes from earlier-version clients and other domain controllers on a best-effort basis; handles password authentication requests involving passwords that have recently changed and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain controller cannot process authentication requests, it may not be able to synchronize time, and password updates cannot be replicated to it.
QUESTION 9
You have a server named Server1 that runs Windows Server 2012 R2.
You plan to use Windows PowerShell Desired State Configuration (DSC) to confirm that the Application Identity service is running on all file servers.
You define the following configuration in the Windows PowerShell Integrated Scripting Environment (ISE):
You need to use DSC to configure Server1 as defined in the configuration.
What should you run first?
A. Service1
B. Configuration1
C. Start DscConfiguration
D. Test-DscConfigu ration
Correct Answer: B
QUESTION 10
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed.
The disks on Server1 are configured as shown in the exhibit.(Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Delete partition E.
C. Convert Disk 1 to a dynamic disk.
D. Take Disk 1 offline.
Correct Answer: D
QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Share and Storage Management
B. New-StoragePool
C. New-VirtualDisk
D. Diskpart
Correct Answer: D
QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1. Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet1 can connect to the client computers in Subnet2 by using an IP address or a FQDN.
You discover that the DHCP clients in Subnet2 can connect to client computers in Subnet1 by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
A. The 015 DNS Domain Name option to Subnet1
B. The 015 DNS Domain Name option to Subnet2
C. The 006 DNS Servers option to Subnet2
D. The 006 DNS Servers option to Subnet1
Correct Answer: C
QUESTION 13
You have a server named dc2.contoso.com that runs Windows Server 2012 R2 and has the DNS Server server role installed.
You open DNS Manager as shown in the exhibit.(Click the Exhibit button.)
You need to view the DNS server cache from DNS Manager.
What should you do first?
A. From the View menu, click Filter…
B. From the Action menu, click Configure a DNS Server…
C. From the Action menu, click Properties.
D. From the View menu, click Advanced.
Correct Answer: D
Explanation:
Navigating the DNS Manager console you should go to the View menu and click the Advanced tab. That will yield the DNS server cache.
QUESTION 14
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2. 070-410 dumps
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From the Services console, configure the General settings.
B. From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
C. From a command prompt, run sc.exe and specify the config parameter.
D. From a command prompt, run sc.exe and specify the privs parameter.
Correct Answer: C
Explanation:
Executing the ss.exe command with the config parameter will modify service configuration.
QUESTION 15
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures. The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS
B. FAT32
C. ReFS
D. NTFS
Correct Answer: C
Explanation:
The ReFS file system allows for resiliency against corruptions with the option to salvage amongst many other key features like Metadata integrity with checksums, Integrity streams with optional user data integrity, and shared storage pools across machines for additional failure tolerance and load balancing, etc.
QUESTION 16
Your network contains a Windows Server 2012 R2 image named Server12.wim.Server12.wim contains the images shown in the following table.
You need to enable the Windows Server Migration Tools feature in the Windows Server 2012 R2 Datacenter image.
You want to achieve this goal by using the minimum amount of administrative effort.
Which command should you run first?
A. dism.exe /image:c:\Server12.wim /enable-feature /featurename:servermigration
B. dism.exe /mount-wim /wimfile:c:\Server12.wim /index:4 /mountdir:c:\mount
C. imagex.exe /capture c: c:\Server12.wim “windows server 2012 r2 datacenter”
D. imagex.exe /apply c:\Server12.wim 4 c:\
Correct Answer: B
Explanation:
This command will mount the image before making any changes.
QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the Security Templates snap-in.
You need to apply Template1 to Server2.
Which tool should you use?
A. System Configuration
B. Local Security Policy
C. Certificate Templates
D. computer Management
Correct Answer: B
Explanation:
A security policy is a combination of security settings that affect the security on a computer. You can use your local security policy to edit account policies and local policies on your local computer.
QUESTION 18
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Print and Document Services server role installed.
Server1 is connected to two identical print devices.
The solution must ensure that if one print device fails, the print jobs will print automatically on the other print device.
What should you do on Server1?
A. Add two printers and configure the priority of each printer.
B. Install the Failover Clustering feature, and then add one printer.
C. Install the Network Load Balancing (NLB) feature, and then add one printer.
D. Add one printer and configure printer pooling.
Correct Answer: D
Explanation:
By adding one printer as the default printer you ensure that only that printer is used at a time, and creating a printing pool to automatically distribute print jobs to the next available printer will cover all the requirements stated in the question. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer.
A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies administration because multiple printers can be managed from the same logical printer on a server.
QUESTION 19
Your network contains an Active Directory domain named contoso.com. The domain contains hundreds of groups, many of which are nested in other groups.
The domain contains a user account named user1.User1 is a direct member of 15 groups.
You need to identify of which Active Directory groups User1 is a member, including the nested groups. The solution must minimize administrative effort.
Which tool should you use?
A. Active Directory Users and Computers
B. ADSI Edit
C. Get-ADUser
D. Dsget
Correct Answer: D
QUESTION 20
You have a new server named Server1 that runs Windows Server 2012 R2.
Server1 has two dual-core processors and 32 GB of RAM.
You install the Hyper-V server role on Server1.
You create two virtual machines on Server1 that each have 8 GB of memory.
You need to minimize the amount of time it takes for both virtual machines to access memory.
What should you configure on each virtual machine?
A. Resource control
B. Memory weight
C. Dynamic Memory
D. NUMA topology
Correct Answer: C
Explanation:
* Dynamic Memory is a new Hyper-V feature that helps you use physical memory more efficiently.
With Dynamic Memory, Hyper-V treats memory as a shared resource that can be reallocated automatically among running virtual machines. Dynamic Memory adjusts the amount of memory available to a virtual machine, based on changes in memory demand and values that you specify. Dynamic Memory is available for Hyper-V in Windows Server 2008 R2 Service Pack 1 (SP1).
* Dynamic Memory helps you use memory resources more efficiently. Before this feature was introduced, changing the amount of memory available to a virtual machine could be done only when the virtual machine was turned off. With Dynamic Memory, Hyper-V can provide a virtual machine with more or less memory dynamically in response to changes in the amount ofmemory required by the workloads or Applications running in the virtual machine. As a result, Hyper-V can distribute memory more efficiently among the running virtual machines configured with Dynamic Memory. Depending on factors such as workload, this efficiency can make it possible to run more virtual machines at the same time on one physical computer.
Why Select Lead 4 pass?
Lead4pass is the best provider of IT learning materials and the right choice for you to prepare for Microsoft 070-410 exam. Other brands started earlier, but the price is relatively expensive and the questions are not the newest. Lead4pass provide the latest real questions and answers with lowest prices, help you pass Microsoft 070-410 exam easily at first try.
The best and most updated latest Microsoft MCSM 070-410 dumps exam practice files in PDF format free download from lead4pass. Helpful newest Microsoft MCSM https://www.geekcert.com/70-410.html dumps pdf training resources which are the best for clearing 070-410 exam test, and to get certified by Microsoft MCSM. If you are looking to get Microsoft Installing and Configuring Windows Server 2012 certification by passing exam 070-410 then you can pass it in one go.
Latest Microsoft MCSM 070-410 dumps vce youtube:
https://youtu.be/qb7dE9eUPjU
What Our Customers Are Saying:
