Cisco 350-401 exam dumps https://www.leads4pass.com/350-401.html (PDF + VCE), all questions and answers are updated to ensure that they are true and valid!
350-401 dumps from Lead4Pass Cisco exam experts. 99.5% of the exam pass rate, real-time updates throughout the year to ensure immediate validity.
You can also practice online for free! All free practice questions are part of the Lead4Pass 350-401 exam dumps.
Lead4pass provides a free Cisco 350-401 PDF
The free Cisco 350-401 exam PDF is part of the Lead4Pass 350-401 exam dumps. The free content can help you know part of the exam information in advance.
If you want to pass the exam easily, you can get the complete 350-401 exam questions and answers in Lead4Pass
Cisco 350-401 exam questions online practice test
QUESTION 1
Which two statements about EIGRP load balancing are true? (Choose two)
A. Cisco Express Forwarding is required to load-balance across interfaces
B. A path can be used for load balancing only if it is a feasible successor
C. EIGRP supports unequal-cost paths by default
D. Any path in the EIGRP topology table can be used for unequal-cost load balancing
E. EIGRP supports 6 unequal-cost paths
Correct Answer: BE
EIGRP provides a mechanism to load balance over unequal cost paths (or called unequal cost load balancing) through
the “variance” command. In other words, EIGRP will install all paths with metric
QUESTION 2
A customer has deployed an environment with shared storage to allow for the migration of virtual machines between
servers with dedicated operating systems that provide the virtualization platform.
What is this operating system described as?
A. hosted virtualization
B. type 1 hypervisor
C. container oriented
D. decoupled
Correct Answer: A
Hosted virtualization is type 2 hypervisor. In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor)
runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that
management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run
on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
QUESTION 3
Which DHCP option helps lightweight APs find the IP address of a wireless LAN controller?
A. Option 43
B. Option 60
C. Option 67
D. Option 150
Correct Answer: A
QUESTION 4
Refer to the exhibit.
Which IPv6 OSPF network type is applied to interface Fa0/0 of R2 by default?
A. multipoint
B. broadcast
C. Ethernet
D. point-to-point
Correct Answer: B
The Broadcast network type is the default for an OSPF enabled ethernet interface (while Point-to- Point is the default
OSPF network type for Serial interface with HDLC and PPP encapsulation). Reference: https:// www.oreilly.com/library/
view/cisco-ios-cookbook/0596527225/ch08s15.html
QUESTION 5
An engineer must configure a GRE tunnel interface in the default mode. The engineer has assigned an IPv4 address on
the tunnel and sourced the tunnel from an ethernet interface. Which additional configuration must be made on the tunnel
interface?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: B
QUESTION 6
At which Layer does Cisco DNA Center support REST controls?
A. EEM applets or scripts
B. Session layer
C. YMAL output from responses to API calls
D. Northbound APIs
Correct Answer: D
QUESTION 7
Which statement about Cisco Express Forwarding is true?
A. It uses a fast cache that is maintained in a router data plane.
B. maintains two tables in the data plane the FIB and adjacency table.
C. It makes forwarding decisions by a process that is scheduled through the IOS scheduler.
D. The CPU of a router becomes directly involved with packet-switching decisions.
Correct Answer: B
Cisco Express Forwarding (CEF) provides the ability to switch packets through a device in a very quick and efficient way
while also keeping the load on the router\\’s processor low. CEF is made up of two different main components: the
Forwarding Information Base (FIB) and the Adjacency Table. These are automatically updated at the same time as the
routing table. The Forwarding Information Base (FIB) contains destination reachability information as well as next hop
information. This information is then used by the router to make forwarding decisions. The FIB allows for very efficient
and easy lookups. Below is an example of the FIB table:
The adjacency table is tasked with maintaining the layer 2 next-hop information for the FIB. An example of the
adjacency table is shown below:
It uses a fast cache that is maintained in a router data plane\\’ fast cache is only used when fast switching is enabled
while CEF is disabled.
QUESTION 8
Which three resources must the hypervisor make available to the virtual machines? (Choose three)
A. memory
B. bandwidth
C. IP address
D. processor
E. storage
F. secure access
Correct Answer: ADE
QUESTION 9
Refer to the exhibit.
A network engineer must configure a password expiry mechanism on the gateway router for all local passwords to
expire after 60 days. What is required to complete this task?
A. Add the username admin privilege 15 common-criteria-policy Administrators password Cisco13579! command.
B. Add the aaa authentication enable default Administrators command.
C. The password expiry mechanism is on the AAA server and must be configured there.
D. No further action is required. The configuration is complete
Correct Answer: A
SUMMARY STEPS
Perform this task to create a password security policy and to apply the policy to a specific user profile.
enable
configure terminal
aaa new-model
aaa common-criteria policy policy-name
char-changes number
max-length number
min-length number
numeric-count number
special-case number
exit
username username common-criteria-policy policy-name password password
end
QUESTION 10
Which two statements about IP SLA are true? (Choose two)
A. It uses NetFlow for passive traffic monitoring
B. It can measure MOS
C. The IP SLA responder is a component in the source Cisco device
D. It is Layer 2 transport-independent correct
E. It uses active traffic monitoring correct
F. SNMP access is not supported
Correct Answer: DE
IP SLAs allows Cisco customers to analyze IP service levels for IP applications and services, to increase productivity, to
lower operational costs, and to reduce the frequency of network outages. IP SLAs uses active traffic monitoringhe
generation of traffic in a continuous, reliable, and predictable manneror measuring network performance. Being Layer-2
transport independent, IP SLAs can be configured end-to- end over disparate networks to best reflect the metrics that
an end-user is likely to experience. Reference: https://www.cisco.com/c/en/us/td/docs/iosxml/ios/ipsla/configuration/15-mt/sla-15-mt-book/sla_overview.html
QUESTION 11
What is the purpose of an RP in PIM?
A. send join messages toward a multicast source SPT
B. ensure the shortest path from the multicast source to the receiver.
C. receive IGMP joins from multicast receivers.
D. secure the communication channel between the multicast sender and receiver.
Correct Answer: A
QUESTION 12
Refer to the exhibit.
A network administrator configured RSPAN to troubleshoot an issue between switchl and switch2. The switches are
connected using interface GigabitEthernet 1/1 An external packet capture device is connected to swich2 interface
GigabitEthernet1/2 Which two commands must be added to complete this configuration? (Choose two)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: BE
Switch2 is not allowing VLAN 70 which is used on Switch1 for RSPAN
so we must allow it -> Option B is correct (although it would not allow VLAN 81 to 90 to go through).
“An external packet capture device is connected to switch2 interface GigabitEthernet1/2” so we must configure Gi1/2
as the destination port.
For your information, this is how to configure Remote SPAN (RSPAN) feature on two switches. Traffic on
FastEthernet0/1 of Switch 1 will be sent to Fa0/10 of Switch2 via VLAN 40.
+
Configure on both switches Switch1,2(config)#vlan 40 Switch1,2(config-vlan)#remote-span
+
Configure on Switch1 Switch1(config)# monitor session 1 source interface FastEthernet 0/1 Switch1(config)# monitor
session 1 destination remote vlan 40
+
Configure on Switch2 Switch2(config)#monitor session 5 source remote vlan 40 Switch2(config)# monitor session 5
destination interface FastEthernet 0/10
QUESTION 13
What are two common sources of interference for Wi-Fi networks? (Choose two.)
A. LED lights
B. radar
C. fire alarm
D. conventional oven
E. rogue AP
Correct Answer: BE
Summarize:
The free Cisco 350-401 exam practice questions are just part of the Lead4Pass 350-401 exam dumps.
The complete Cisco 350-401 exam questions and answers https://www.leads4pass.com/350-401.html (total questions: 549 Q&A).
All questions and answers have been updated and corrected. A complete exam dump ensures 100% successful passing of the exam.
ps.
The free Cisco 350-401 exam PDF is part of the Lead4Pass 350-401 exam dumps. The free content can help you know part of the exam information in advance.
If you want to pass the exam easily, you can get the complete 350-401 exam questions and answers in Lead4Pass