High quality Cisco CCNA Collaboration 210-065 dumps pdf files and vce youtube demo free shared. Helpful newest Cisco CCNA Collaboration 210-065 dumps exam questions and answers free download from lead4pass. “Implementing Cisco Video Network Devices v1.0” is the name of Cisco CCNA Collaboration https://www.geekcert.com/210-065.html exam dumps which covers all the knowledge points of the real Cisco exam. The best and most updated Cisco CCNA Collaboration 210-065 dumps exam training mateials free try, pass Cisco 210-065 exam test easily.
The best Cisco 210-065 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRODRqVmVBYWxuc0k
The best Cisco 210-451 dumps pdf files free download: https://drive.google.com/open?id=0B_7qiYkH83VRQV9nZms0RGtyVGc
QUESTION 1
An engineer needs to connect an external display to a Cisco TelePresence MX700 endpoint. What must the engineer do to access the external monitor output connector?
A. Remove the cover under the main monitor. The cover is fastened with two screws.
B. Remove the cover on the back of the system. The cover is fastened with magnets.
C. Remove the cover on the right side of the system. The cover is fastened with four screws.
D. Remove the cover on the left side of the system. The cover is fastened with magnets.
Correct Answer: D
QUESTION 2
Which encoder is best suited for professional, studio-quality audio and video processing?
A. Scientific Atlanta Encoder
B. Cisco Digital Media Encoder 1000
C. Cisco Digital Media Encoder 2000
D. Cisco Digital Media Encoder 3000
Correct Answer: C
QUESTION 3
The command xCommand Security FIPSMode Activate is issued to a Cisco TelePresence C-Series codec.
Management wants to reverse the effects of this command. Which two methods could be used for this purpose? (Choose two.)
A. From the touch screen, disable FIPS mode in the Administrator Settings menu.
B. From the touch screen, perform a factory reset from the Administrator Settings menu.
C. From the touch screen, disable all security settings from the Administrator Settings menu.
D. Use SSH to connect to the system and enter the xCommand Security FIPSMode Deactivate command.
E. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset Init command.
F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.
Correct Answer: BF
QUESTION 4
Which codec represents video that is supported by Cisco TelePresence endpoints? 210-065 dumps
A. H.263
B. H.323
C. H.264
D. H.262
Correct Answer: C
QUESTION 5
Refer to the exhibit.
An H.323 endpoint that is registered to Cisco VCS Control is not able to make B2B calls. Calls to other internal endpoints are working fine. What is the likely cause of the issue?
A. The Conductor H.323 zone is set to andquot;Off.andquot;
B. The Traversal Zone H.323 zone is set to andquot;Off.andquot;
C. The Production CUCM H.323 zone is set to andquot;Off.andquot;
D. The Traversal Zone H.323 zone is in a andquot;Failedandquot; state.
Correct Answer: B
QUESTION 6
Refer to the exhibit.
Which system does this web user interface refer to?
A. Cisco Unified Communications Manager
B. Cisco Video Communications Server
C. Cisco Digital Media Manager
D. Cisco TelePresence Management Suite
Correct Answer: D
QUESTION 7
Which all-in-one dual-screen solution can be used for an average meeting room without the need for external monitors?
A. MX700
B. MX300G2
C. EX90
D. SX80
E. TX9000
F. MX200G2
Correct Answer: A
QUESTION 8
Refer to the exhibit.
Users in a Cisco TelePresence room report audio and video quality issues. You have been asked to troubleshoot the issue. 210-065 dumps You log in to the endpoint GUI and check telephony settings. Which option would you recommend to resolve the issue?
A. Audio/video quality issues are generally due to low bandwidth. Contact your carrier to increase the bandwidth.
B. andquot;DSCP For TelePresenceandquot; is not correct. Configure the correct value via codec GUI.
C. andquot;DSCP For Audioandquot; is not correct. Configure the correct value via codec GUI.
D. DSCP values are correct. Check the QoS configuration on the router.
E. The andquot;DSCP For TelePresenceandquot; and andquot;DSCP For Audioandquot; values are not correct. Configure the correct value in codec GUI.
F. The andquot;DSCP For TelePresenceandquot; and andquot;DSCP For Audioandquot; values are not correct. Configure the correct value in the Cisco Unified Communications Manager service parameter.
Correct Answer: F
QUESTION 9
Refer to the exhibit.
An administrator is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. The Cisco VCS uses local authentication and a single username for all endpoints. Where is the first place that the administrator should go to resolve the issue?
A. VCS andgt; Configuration andgt; Authentication andgt; Devices andgt; Local Database
B. Endpoint andgt; Configuration andgt; System Configuration andgt; Profile 1 andgt; Authentication
C. VCS andgt; Configuration andgt; Authentication andgt; Outbound Connection Credentials
D. Endpoint andgt; Configuration andgt; System Configuration andgt; SIP andgt; Profile 1 andgt; Authentication 1
E. VCS andgt; Configuration andgt; Registration andgt; Allow List
F. VCS andgt; Configuration andgt; Registration andgt; Deny List
Correct Answer: D
QUESTION 10
Refer to the exhibit.
Which tab can be used in order to check the call statistics for the Cisco TelePresence Codec C60?
A. Diagnostics
B. Configuration
C. Call Control
D. Maintenance
E. The GUI cannot be used to view call statistics.
Correct Answer: C
QUESTION 11
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part of this process? (Choose two.)
A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
Correct Answer: CE
QUESTION 12
Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)
A. automatic software update and release keys
B. intelligent call routing engine
C. provisioning a Cisco TelePresence System endpoint
D. tracing SIP and H.323 calls
E. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified Communications Manager
F. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server
Correct Answer: ABF
QUESTION 13
You are checking a DHCP server configuration for video endpoints. What is the role of option 150 in the configuration? 210-065 dumps
A. It is the NTP server IPv4 address.
B. It is not necessary to specify the role of option 150.
C. It is the TFTP server IPv4 address.
D. It is the TFTP server IPv6 address.
Correct Answer: C
QUESTION 14
A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)
A. The codec firmware version is below version TC 6.1.
B. The codec and the Touch 8 are on separate subnets.
C. Pairing visibility mode is not active on the codec.
D. The codec is not compatible with a Touch 8 device.
E. The Touch 8 is connected via the second Ethernet port on the codec.
Correct Answer: BC
QUESTION 15
A customer owns three Codian 5300 MCUs with several video endpoints. Users complain that they are getting multipoint control unit port capacity errors when scheduling video conferences in Cisco TMS. What can be done to correct these errors automatically?
A. Enable the Automatic MCU Cascading option in the Cisco TMS Conference Settings.
B. Install a Cascading option key on the Cisco TMS server.
C. Install a Cisco TelePresence Conductor server.
D. Install cascaded multipoint control units.
Correct Answer: C
QUESTION 16
Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conference participant over the other conference participants while still allowing conference participants to view multiple participants at the same time?
A. enhanced continuous presence
B. active speaker
C. continuous presence
D. room switching
E. speaker switching
Correct Answer: A
QUESTION 17
An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for ingesting andprocessing video media and production capabilities. Which two advances does the Cisco MXE 3500 provide? (Choose two.)
A. automated graphical integration that can embed metadata overlays on videos during processing
B. over 2 terabytes of storage for both local and streaming media applications
C. automated ingesting of video files based on watch folders
D. clustering capability of up to 20 resource nodes to handle and balance incoming media requests and processing
E. live output abilities to provide DV, DVC Pro, DVC Pro 50, and DVC Pro HD format streams
F. ability to create VoD file outputs to WebEx ARF format
Correct Answer: AC
QUESTION 18
A new Cisco DX650 is not registering in the Cisco Communications Manager running version 9.1.2. The latest device package and firmware was uploaded on all Cisco Communications Manager servers in the cluster. 210-065 dumps What is most likely the cause of this issue?
A. A cluster-wide reboot is needed to enable the functionality.
B. You must restart the TFTP server.
C. The firmware in the Cisco Unified Communications Manager is incorrect.
D. The software version in the Cisco Unified Communications Manager is incorrect.
Correct Answer: A
QUESTION 19
When placing a Multiway call through a Cisco TelePresence Conductor, which IP address on the Conductor should the call be routed to?
A. Rendezvous IP address
B. Ad hoc IP address
C. Scheduled conference IP address
D. Management IP address
Correct Answer: A
QUESTION 20
Which two methods can you use to update the configuration automatically using the persistent configuration settings for an endpoint using TMS? (Choose two.)
A. Manually refresh the endpoint configuration for the Cisco TMS provisioning page.
B. Cisco TMS can be scheduled to push a template to endpoints.
C. User can edit the configuration manually for the endpoint from Cisco TMS.
D. The endpoint can receive the persistent settings from Cisco TMS after each reboot.
E. The endpoint can download the configuration via DHCP option 150.
Correct Answer: BD
Best useful Cisco CCNA Collaboration 210-065 dumps exam practice materials and study guides in PDF format download free try from lead4pass. Latest Cisco CCNA Collaboration https://www.geekcert.com/210-065.html dumps pdf training resources which are the best for clearing 210-065 exam test, and to get certified by Cisco CCNA Collaboration, 100% success and guarantee to pass.
